ZELIONI CLB03 Clutch bell

Clutch Bell ZELIONI for Vespa Primavera/Sprint/LX (Vietnam) Primavera/Sprint/LX (Vietnam)/S (Vietnam) 3V i.e. 125ccm for PIAGGIO LEM/iGet 3V i.e.125cc 4T AC If the clutch bells have turned blue or they are evidently worn out on the interior side, the clutch friction plates will wear out more quickly. If the bell is worn out, slipping or jerking will take place when starting the engine. If this happens it's time to replace it. Clutch bells which are fitted as standard are mostly made in two parts. This causes an imbalance, which makes the clutch seem harsh. The ZELIONI clutch bell has a hard chromed surface and is made from one single unit. Its wall thickness is clearly thicker than it is the case on the original. This makes it completely dimensionally stable and with no imbalance. The fine grain blasted pressure surface on the interior side offers the ideal traction between the clutch and the bell. This means jerky clutches are a thing of the past. For installation purposes it is not possible to use the BUZZETTI holding tool (art. No. BU5428). We recommend blocking the clutch bell with a bolt or using an impact wrench. SIP-TIP: Don't forget a new clutch nut. Polyamide V-belts, sport clutches and variators are a good upgrade.