OptiMate PRO-1 DUO 12V 10A Battery charger diagnostic tester and power supply

OptiMate PRO-1 DUO is the professional solution combining charger, diagnostic tester and power supply, designed for powersport experts, small boat and machinery professionals, as well as repair workshops and battery retailers. It offers complete battery management, from recovery to diagnostics, up to support during technical work.

Three selectable modes allow you to choose between charging 12V lead-acid batteries, 12.8V LiFePO4 lithium batteries, or PowerSupply mode to support the battery during vehicle diagnostics, tuning or troubleshooting. Automatic quick battery activation is indicated by a flashing green light, confirming health and sufficient charge.

The charger includes a smart recovery mode for deeply discharged batteries, quickly distinguishing between defective and recoverable ones. For LFP lithium batteries, a manual BMS reset is available via button. Diagnostic testing clearly indicates battery status: GOOD (80–100%), OK (60–80%) or BAD (below 60%).

The PowerSupply mode provides constant power, ideal for vehicle tuning, diagnostics and configuration. Built for intensive use, it is compatible with 12V lead-acid (STD, AGM, GEL) and 12V LiFePO4/LFP lithium batteries, and is CE, UKCA, NRTL (UL & CSA), PSE (Japan) and SAA (Australia & New Zealand) certified. With high efficiency technology, synchronous rectification and power factor correction, it ensures up to 50% lower energy consumption and costs.

Robust and versatile, OptiMate PRO-1 DUO comes in a practical case with rubber bumpers, hanging hook and wall-mount bracket included.

CARATTERISTICHE

• Ideal for:
  • Professional use: 12V lead-acid STD & AGM 3–50Ah, lithium LFP (LiFePO4) 12.8V/13.2V 2–20Ah
  • Normal use: 12V lead-acid STD & AGM 3–240Ah, lithium LFP (LiFePO4) 12.8V/13.2V 2–120Ah
• Charging current: 0.4A to 10A (Ampmatic)
• Charging voltage:
  • Lead-acid 12V: 0.5V–22V
  • Lithium LFP (LiFePO4) 12.8V/13.2V: 0.5V–14.4V
  • Power supply: 11V–13.6V
• Operation: selectable
• Use: internal protection rating IP40
• Input: universal 100–240V (50–60Hz), high efficiency
• Construction: case with rubber bumpers, wall/hook mounting bars, AC Class 2 input socket with ON/OFF switch, 15 cm output cable
• Cables included: Class II AC cable suitable for the region, 180 cm O-43 charging extension, O-14 fused battery clips
• Hardware included: wall-mount bracket and hook bar