SIP 86135264 MOTORCYCLE ELECTRICAL SYSTEM

Wiring Loom SIP for Vespa 125 VNA-TS/150 VBA-T4/Rally, 125 VNA-TS/150 VBA-T4/Rally, w/o battery (buzzer), withparkinglight, high-/low beamand brake light, withindicator,breaker ignition with anti-theft device In order to make the connection of an ignition easier and to avoid connection errors, we offer SIP wiring looms for retrofitting to SIP by Vape/ PARMAKIT/ VESPATRONIC/ MALOSSI/ POLINI/ PINASCO ignition. The wiring loom is prepared for all SIP by Vape/ PARMAKIT/ VESPATRONIC/ MALOSSI/POLINI/ PINASCO ignitions with matching plugs and lengths. The wiring loom is produced so that it is easy to fix. The wiring loom for the rear light and headlamp unit is chosen to be deliberately longer in order to make the connection easier. May optionally be supplied for models with or without indicator handlebar ends. The frame rubber for the rear light cable is already pre-mounted. Made in Europe. The best cable quality. Each wiring loom is checked and quality labelled for functionality. A detailed wiring diagram is enclosed. Conclusion: Makes connection far easier and prevents connection errors due to incorrect wiring. SIP TIPP: Change the brake light switch and light switch to “shutter” switches. Install 12 V light bulbs / festoon bulbs. Now with added security : The wiring loom now includes a connection for an ignition switch or kill-switch. This is ideal for older Vespa models that did not originally benefit from the extra security that an ignition switch provides. The attachments are of sufficient length to allow positioning of the switch either in the toolbox, or even tucked away beneath the sidepanel! The ignition lock, or switch, is not included with the wiring loom and must be ordered separately.