Search for Products

POLINI 10402000 THERMAL UNIT CYLINDER KIT

for PIAGGIO VESPA PK S AUTOMATICA VAM1, VESPA PK S V8X5, VESPA PK S V9X1, VESPA PK VMX1

Check the compatibility with your motorcycle
FIND YOUR BIKE - compatibility table

Ref.
621392
Cod.
10402000

-11%

Special Price €518.80 Regular Price €583.34

Shipped within 7 days More info

Free shipping from €250 More info

Returns and changes within 30 days More info

Tuning Kit POLINI ROAD 130 cc 2-hole for Vespa PK80-125 S 2-hole for Vespa PK80-125 S/PK125 Ø 57mm, cast iron, stroke 51mm, with carburettor kit 19.19,racing exhaust, primarydriven gear, etc., ROAD-TUNING, for everyday use& reliable For race use only. Not admitted in the area of the German StVZO! The tuning jungle is big, the range of products available is massive and the possibilities are almost infinite. Over the years, a range of most wanted combinations have crystallised in the area of road tuning which fulfil the same requirements: a clear increase in performance, a better exhaust performance and higher top speed, good durability, easy installation, no or limited changes to the engine case, conversion-back possibility, and a good price performance ratio. The Tuning Kits include most customers' and the SIP team's favourite combinations. They are a very good upgrade for the corresponding engine. They are sporty but great for touring use at the same time. They include all the necessary small components and are therefore the ideal first step for anyone with no previous knowledge of tuning whatsoever. The ROAD Kit is the starter kit. With this kit, attention has been paid to providing a low cost package which still provides superior acceleration and a higher top speed. The SPORT Kit contains a high rev cylinder and frequently includes a bigger carburettor. This results in more power and higher speed. The carburettors mostly come without separate lubrication. Those who mix themselves know what happens in the combustion chamber. The carb. jetting is an approximate value and at 0 m above mean sea level, Hamburg differs from the alps. Both kits represent a sound basis for further tuning. This is always associated with a change of crankshaft, however, which involves opening the engine. If the engine is already old and has done a lot of kilometres, an engine overhaul is recommended. If you're going to open the engine, you are advised to take the opportunity to extend your tuning job to include the crankshaft and gear components. Conclusion: Tuning kits enable beginners to save money and stress and to benefit from the tuning experience the SIP team has gained over many years. The premier class of the smallframes is also great for tuning - with enduring results. A trip to Italy with the smallframe? Utopia becomes reality: The ROAD kit makes it possible and you can even try overtaking at a pass like the Stilfser Joch. The Road kit with the 3-hole manifold is supplied with PK XL2 clutch friction plates. The SPORT kit includes the MALOSSI 136cc. At a realistic price you get a potent force which you will have to tame! Both kits are 'plug&play' tuning kits and do not involve changing the engine case. In combination with a 125cc crankshaft, these kits can also be installed in 50cc smallframes. The Tuning Kit POLINI ESC Class 5 is the plug&play solution for the standard class of the European Scooter Challenge. Powerful, reliable and perfect if you fancy giving it a try on the ractetrack but have a tight budget. ROAD KIT POLINI 130cc: racing cylinder POLINI 130cc, carburettor kit 19.19, racing exhaust FACO Banana/SITO Plus, primary gear ratio 2.56, reinforced clutch plates, spark plug, 2 man jets, nut/washer clutch+primary gear cog, ignition timing approx. 16° SPORT KIT MALOSSI 136cc: racing cylinder MALOSSI 136cc, carburettor kit PHBL 24/25 with slide valve manifold, racing exhaust MALOSSI (V50)/POLINI (PK), primary gear ratio 2.56, reinforced MALOSSI clutch plates, spark plug, 3 main jets, nut/washer clutch+primary gear cog, ignition timing approx. 17° TUNING KIT POLINI ESC Class 5: racing cylinder POLINI 130cc, carburettor kit PHBL 24/25 with slide valve manifold, racing exhaust MALOSSI (V50)/POLINI (PK), primary gear ratio 2.56, reinforced MALOSSI clutch plates, spark plug, 3 main jets, nut/washer clutch+primary gear cog, ignition timing approx. 17° SIP-TIP: A Vespatronic is a perfect add-on. A more powerful racing exhaust, a racing crankshaft and a reed valve carburettor kit are the next steps.
This product fits your
This product does not fit with
PIAGGIO
VESPA PK S AUTOMATICA VAM1 125 1982-1984
VESPA PK S V8X5 80 1982-1988
VESPA PK S V9X1 100 1982-1984
VESPA PK VMX1 125 1982-1985