POLINI Ignition Cone D.19 Vespa 125 ET3
for PIAGGIO VESPA 125, VESPA ET3 VMB, VESPA L V5A, VESPA PK S V5X2, VESPA PK S V8X5, VESPA PK S V9X1, VESPA PK V5X, VESPA PK VMX1, VESPA PK XL N V5X5, VESPA PRIMAVERA VMA, VESPA R V5A, VESP ...
Check the compatibility with your motorcycle
FIND YOUR BIKE - compatibility table
-20%
Special Price €343.40 Regular Price €429.28
The POLINI ignition cone D.19 is the ideal choice for Piaggio Vespa 50/125 engines, designed to optimize performance without compromising lighting. Thanks to the flywheel weighing 1.2 kg, this ignition allows for quicker acceleration, with an advance of 23 degrees at 3,500 RPM. It is essential to replace all original 6 V bulbs with 12 V bulbs to ensure optimal operation.
Installation is simple and straightforward: start by removing the original flywheel, stator, and control unit. Next, install the POLINI stator onto the mounting plate using TCEI M6x25 screws, threading the wires through the designated slot. The stator mounting plate should be screwed to the casing with TCEI M5x14 screws and Ø5x20 washers. It is important to correctly position the timing references.
After mounting the flywheel on the crankshaft and securing the included nut, proceed with the installation of the cooling fan. The wiring must be connected following the provided instructions, ensuring that each connection is made correctly for safe and reliable operation.
This ignition is compatible with Vespa 125 ET3 Primavera and Vespa 50 models, offering an excellent solution for those looking to enhance the performance of their scooter.
- Compatibility: Vespa 50/125
- Flywheel weight: 1.2 kg
- Advance: 23 degrees at 3,500 RPM
- Bulb requirement: replacement from 6 V to 12 V
- Installation: simple and straightforward
- Mounting screws: TCEI M6x25 for the stator, TCEI M5x14 for the mounting plate
- Washers: Ø5x20
- Compatible models: Vespa 125 ET3 Primavera and Vespa 50
| Made in | Italy |
|---|
