PASCOLI L0865-1 MOTORCYCLE RIM

Rim PASCOLI for Vespa 150 VGL1T/GS VS4T, conversion rim VGL1T/GS VS4T, conversion rim8' to 10' closed, also forVespa 150 GS VS1-3T/VD1T/VD2T, 2.10-10', closed, dark grey, 4-hole, nut M8, wrench 11, for a true to original repair - grade A Due to their two-part construction, Vespa rims are designed so that it is possible to change the tyres yourself even with a minimum of tools. Another advantage is that the Vespa generally has the same rim at the front and back. This makes carrying a spare wheel particularly worth it as the rim can then either be used on the front or rear. In principle, the rim should be checked each time the tyres are changed. Rust in the rim well is often the reason for leaky inner tubes. Our cheaper replacement rims make overhauling unattractive in most cases. The size specification for the rims is always given by us in inches, abbreviated on the product description with inverted commas (for example 8' = 8 inch). The width of the rim is just as important as the size specification. This is also given in inches (for example 2.10). The construction type must be noted as a further distinguishing criterion of the rims. Depending on the brake drum used, there are both closed and open rims. In this way, for example, except for the Vespa Super 125-150, all vintage models use closed 8' rims. You will only find a 9' rim in the case of smallframes. Rim 10', closed for Vespa 150 VGL1TThe dark grey replica rim of the 150 GL also fits the Vespa 150 GS/VS1-4T and the German T2-T3 models with regard to the hole pattern. The manufacturer MAURO PASCOLI attaches great value to the original look which was a complete success with this rim! SIP TIP: Don´t forget new tyres and tubes!###L0865-1 (Mauro Pascoli)