MOTUL 109989 1L 710 SYNT 2 STROKE OIL

Motul 710 2T

710 2T is a 2-stroke high-performance engine oil with high-quality ester components for the highest demands in racing and on the road in all 2-stroke engines with injection or carburetor. Suitable for both mixed and separate lubrication. Compatible with modern exhaust aftertreatment systems.

SPECIFICATIONS/STANDARDS:
STANDARDS: API TC, ISO-L-EGD
APPROVALS: JASO FD N° M033MOT064

JASO (Japanese Automobile Standards Organization) has developed its own standard for 2-stroke motorcycle engine oils, JASO M 345, which classifies the different qualities with the gradations FB, FC, FD with the aim of improving the performance of two-stroke oils. The JASO M 345 assesses the quality of the engine oil according to the following four criteria: Lubricity, Low Smoke Combustion, Engine Cleanliness, Exhaust System Clogging. JASO FD is a very high performance level.
ISO (International Organization for Standardization) L-EGD corresponds to the requirements of JASO FC only in the evaluation of the cleaning power of the oil stricter criteria are set. ISO L-EGD describes the currently highest performance level for 2-stroke engine oils.

ADVANTAGES:
- Pre-dissolved 2-stroke high performance engine oil allows fast and stable fuel/oil mixing.
- Outstanding lubricating properties reduce frictional losses and provide reliable wear protection even in high RPM ranges and under high thermal loads.
- Particularly low smoke and ash combustion.
- The excellent cleaning properties keep pistons and the entire engine components clean. This prevents deposits and coking in the combustion chamber, on spark plugs and in the exhaust system.
- Prevents piston rings from sticking.
- Good visibility in the fuel/oil mixture due to green coloring.
- Available in the practical resealable 1-liter can with filler neck, dosing scale and viewing strip, making it easier to refill the oil or premix.

RECOMMENDATIONS AND NOTES:
Before use, be sure to observe the manufacturer's service documents and recommendations! Mixing ratio for mixture lubrication from 2% to 4% (50:1 to 25:1) or as specified by the manufacturer.

PROPERTIES:
color (visual) green
density at 20°C ASTM D 1298 0.862
viscosity at 40°C ASTM D 445 46.4 mm²/s
viscosity at 100°C ASTM D 445 8.9 mm²/s
Viscosity index ASTM D 2270 175
Pour point ASTM D 97 < -39°C
Flash point ASTM D 92 88°C
TBN ASTM D 2896 2.15mg KOH/g