Search for Products

MALOSSI 1010100J Thermal unit cylinder kit

for PIAGGIO VESPA P V8A1, VESPA PX E V8X1, VESPA PX E VIX1

Check the compatibility with your motorcycle
FIND YOUR BIKE - compatibility table

Ref.
621276
Cod.
1010100J

-1%

Special Price €630.00 Regular Price €634.61

Shipped within 4 days More info

Free shipping from €250 More info

Returns and changes within 30 days More info

Tuning Kit MALOSSI Sport MK III 139 cc for Vespa P80X/PX80 III 139 cc for Vespa P80X/PX80E/Lusso/PX100E Ø 61mm, stroke 48mm, with SIP Road, clutch plates,POLINI air filter,carburettor SI 24 (w/oseparate lubrication), etc., SPORT-TUNING, high-performance& roadworthy For race use only. Not admitted in the area of the German StVZO! The tuning jungle is big, the range of products available is massive and the possibilities are almost infinite. Over the years, a range of most wanted combinations have crystallised in the area of road tuning which fulfil the same requirements: a clear increase in performance, a better exhaust performance and higher top speed, good durability, easy installation, no or limited changes to the engine case, conversion-back possibility, and a good price performance ratio. The Tuning Kits include most customers' and the SIP team's favourite combinations. They are a very good upgrade for the corresponding engine. They are sporty but great for touring use at the same time. They include all the necessary small components and are therefore the ideal first step for anyone with no previous knowledge of tuning whatsoever. The ROAD Kit is the starter kit. With this kit, attention has been paid to providing a low cost package which still provides superior acceleration and a higher top speed. The SPORT Kit contains a high rev cylinder and frequently includes a bigger carburettor. This results in more power and higher speed. The carburettors mostly come without separate lubrication. Those who mix themselves know what happens in the combustion chamber. The carb. jetting is an approximate value and at 0 m above mean sea level, Hamburg differs from the alps. Both kits represent a sound basis for further tuning. This is always associated with a change of crankshaft, however, which involves opening the engine. If the engine is already old and has done a lot of kilometres, an engine overhaul is recommended. If you're going to open the engine, you are advised to take the opportunity to extend your tuning job to include the crankshaft and gear components. Conclusion: Tuning kits enable beginners to save money and stress and to benefit from the tuning experience the SIP team has gained over many years. The original PX80 is very feeble. It gets its wind up with the D.R and with the MALOSSI it touches on 100 km/h. Taking a passenger without chugging along and creating a traffic jam is also possible with each kit. A lighter SIP flywheel or a VESPATRONIC/PARMAKIT ignition are also recommended. An Italian/English racing exhaust, a racing crankshaft and a bigger carburettor are the next steps. ROAD KIT D.R. 135cc: racing cylinder D.R. 135cc, racing exhaust SIP ROAD, D.R. clutch plates, spark plug, air intake system POLINI, 3 main jets, nut/cage clutch, ignition timing approx. 19° SPORT KIT MALOSSI 139cc: racing cylinder MALOSSI 139cc, carburettor DELL`ORTO SI 24.24E from PX200 w/ separate lubrication, racing exhaust SIP ROAD, clutch gear cog 22 teeth Ø 96mm, MALOSSI clutch plates, air intake system POLINI, 3 main jets, nut/cage clutch, ignition timing approx. 19° SIP-TIP: A lighter SIP flywheel or a VESPATRONIC/PARMAKIT ignition are also recommended. An Italian/English racing exhaust, a racing crankshaft and a bigger carburettor are the next steps.
This product fits your
This product does not fit with
PIAGGIO
VESPA P V8A1 80 1980-1984
VESPA PX E V8X1 80 1981-1990
VESPA PX E VIX1 100 1983-1984