Malossi Manifold D 34x45 Front Inclined

The Malossi Ø 34x45 front inclined intake manifold is an essential component for the proper functioning of the engine. This intake manifold allows the entry of the air-fuel mixture into the combustion chamber through the reed valve. The total performance of the engine depends on various factors, including volumetric, thermodynamic, and mechanical efficiency.

Volumetric efficiency represents the ratio between the amount of mixture entering the combustion chamber and the engine displacement. To achieve high volumetric efficiency, it is essential to minimize friction losses during the mixture path, from the air filter to the combustion chamber. The intake manifold plays a fundamental role in this process, as it must allow the passage of the mixture with minimal loss. It is important to avoid sudden increases in section and sharp edges along the mixture path.

In addition, the intake manifold acts as a reservoir for the fresh charge. When the reed valve closes, the mixture accumulates in the manifold, compressing against the reeds. Each manifold has a specific range of engine speeds in which it expresses maximum efficiency, so it is important to tune it correctly.

The intake manifold also connects the carburetor to the engine crankcase or cylinder and dampens the vibrations transmitted from the crankcase to the carburetor. This prevents the phenomenon of fuel and air emulsion in the carburetor float bowl.

Malossi, with its extensive experience in the field of engine fuel systems, has developed a new line of rubber and aluminum alloy manifolds for the new generation of scooters. These manifolds have been tested and developed by the Malossi experience department, both on the road and on racing circuits. Malossi rubber manifolds feature a composite structure, with an aluminum insert embedded in a plastic material resistant to oils and gasoline. This ensures a rigid attachment to the crankcase and good elasticity of the manifold body.

Therefore, the Malossi Ø 34x45 front inclined intake manifold is a high-quality component designed to maximize engine performance and ensure optimal performance.

COMPATIBILITY NOTES

Please note: The following notes refer only to the vehicles listed below. These vehicle lists may not represent the complete compatibility list for the product.

Replacement for Malossi fuel systems art. 1610386, 1610980 (production discontinued).

• DUCATI SS (906) 900

Replacement for Malossi fuel systems, article numbers 1610394, 1610813, 1610700 (production discontinued)

• DUCATI SS 900

Replacement for Malossi fuel systems art. 1610700, 1610760, 1610814 (production discontinued).

• DUCATI PANTAH 900

Replacement for Malossi fuel systems article 1610700, 1610760 (production discontinued).

• DUCATI PANTAH 600

Replacement for Malossi fuel systems art. 1610826 (production discontinued).

• BIMOTA DB1 750

Replacement for Malossi fuel systems art. 1610927, 1610937 (production discontinued).

• DUCATI PASO 750

Replacement for Malossi fuel systems part no. 1610964 (production discontinued).

• DUCATI SPORT 750