JMT YTR4A-BS Precharged Gel Battery 12V 2.3Ah
for HONDA, DERBI
Check the compatibility with your motorcycle
FIND YOUR BIKE - compatibility table
-12%
Special Price €22.90 Regular Price €26.00
The pre-charged gel battery JMT YTR4A-BS is the ideal solution for those seeking reliability and high performance for their motorcycle. With a voltage of 12V and a capacity of 2.3 Ah (10 hours), this battery offers an energy performance of 27.6 Wh, ensuring safe and fast starting. Its gel design makes it resistant to vibrations and shocks, perfect for tackling even the most challenging conditions.
Activated and ready to use, it features a CCA declared by the manufacturer of 45 A, ensuring optimal starting power. Tests conducted according to EN, SAE, and DIN standards confirm its efficiency, with measurements of 10 A, 90 A, and 55 A respectively. The compact dimensions of 112 mm in length, 48 mm in width, and 88 mm in height, along with a weight of 1.06 kg (acid included), make it easy to install in various motorcycle models.
The flat connector facilitates connection, while the positive terminal is located on the rear right and the negative terminal on the front right, ensuring a simple and intuitive setup. Without a vent hole, this battery is designed for safe and worry-free use. Choosing the JMT YTR4A-BS means opting for a battery that combines advanced technology and practicality, for a top-notch riding experience.
- Voltage: 12V
- Capacity: 2.3 Ah (10 hours)
- Energy performance: 27.6 Wh
- Design: Gel, resistant to vibrations and shocks
- CCA: 45 A
- Efficiency tests: according to EN, SAE, and DIN standards
- Dimensions: 112 mm (length) x 48 mm (width) x 88 mm (height)
- Weight: 1.06 kg (acid included)
- Connector: Flat
- Positive terminal: Rear right
- Negative terminal: Front right
- Vent hole: Absent
| Capacity | 2.3 Ah (10 Std) |
|---|---|
| Width | 48 mm |
| Height | 88 mm |
| Weight | 1,06kg |
| Voltage | 12v |
| Type | Gel |
| Activated | Yes |
| Manufacturer claimed CCA | 45 A |
| Manufacturers Testing Standard | EN |
| SAE as measured by JMP battery tester | 10 A |
| DIN as measured by JMP battery tester | 90 A |
| EN as measured by JMP battery tester | 55 A |
| Length | 112 mm |
| Weight (including acid) | 1.06 kg |
| Acid Pack included | No |
| Terminal connection | Spade Connector Male |
| Positive terminal | Front left |
| Negative terminal | Rear left |
| Breather hose | Without |
| Manufacturer | JMT |
