FA ITALIA 191804 MOTORCYCLE BRAKE CABLE

Cable Brake rear for Vespa 50-125/PV/ET3/PK/XL/XL2/PX80 50-125/PV/ET3/PK/XL/XL2/PX80-200/PE/Lusso/´98/MY/´11/LMLStar with sleeve and eye, l (cable)=900mm, Ø 2,5mm/7,0mm, l (sleeve)=660mm, Grade A - perfect repair Cables are among the most important spare parts. You should carry a spare set on your scooter and you should also keep a spare set in your garage at home. Snapped cables are an annoyance on every excursion. Cables which are hard to pull take their toll on the nerves and tendons. Frayed cables have to be replaced. For this reason, whether it is a restoration or annual service, replacing the cables on a regular basis is recommended. We only stock high quality cables which we fit to our own scooters. They are available as individual cables, cables with sleeve and optionally also with PTFE sleeve. They differ in terms of their length and diameter and the appearance and colour of the sleeve. Certain throttle, choke and brake cables differ depending on the specific model. Cables with PTFE sleeves are perfect for tight installation radii and are very easy to operate. The interior section of the sleeve has a special lining which has a clearly superior effect on the running and the lifespan of the cable. These cables do not require lubricating either. SIP-TIP: Order screw nipple and new adjusting screws at the same time! Everything apart from PTFE has to be lubricated with oil or grease! Rear brake cable:Without eyelet: The cable is clamped to the brake pedal with screw nipple PART No 17726100. For the attachment to the brake drum, screw nipple PART No 17726000 is required. With eyelet: The cable is simply mounted to the brake pedal with the eyelet. For attachment to the brake drum, screw nipple PART No 17726000 is required.###191804 (PIAGGIO)