EFFE long pins with pin for Vespa 90/R/100

Contact Breaker for Vespa 90 2°/R 2°/100/125 PV 2° 90 2°/R 2°/100/125 PV 2° also for PIAGGIO Ape 50-250 long, with pin Grade B - decent repair The contact breaker is in place to interrupt the power created between the ignition coil located on the stator plate, and the flywheel magnets at the right moment in order to send a high tension pulse to the spark plug, so creating an ignition spark. The teamwork between the contact breaker and the stator leads to the electromagnetic field collapsing and so creating the ignition pulse inductively through the secondary generator coils. The contact is broken mechanically with the force created by the magnets located in the flywheel, which leads to inevitable erosion and wear. We can supply contact breaker units for virtually all pre-electronic ignition VESPA and Lambretta motors. To find out which contact breaker unit you needn use your specific engine number and the country it was produced in or imported to and please check our extensive listings at our website. If the listings in the catalogue prove insufficient please look at our website for more details. The condensers we stock are produced by the PIAGGIO OE Italian manufacturer EFFE. We also offer a good and propitious alternative. Conclusion: Contact breaker units, should be changed regularly and also included in your glove-box for the longer runs. SIP-TIP: While replacing this item always change the condenser (or capacitor) at the same time. A feeler gauge (part no. 60825000) makes the whole job a lot easier.###141838 (PIAGGIO)