CRIMAZ 50053200 MOTORCYCLE CLUTCH PART

Pressure Plate Clutch CRIMAZ 30mm for Vespa 50-125/PV/ ET3 30mm for Vespa 50-125/PV/ ET3/PK/S/XL for Vespa 125 VNA-TS/150 VBA-Super/PX80-150/PE/Lusso when using clutches with 30mmhole for a first-class repair -grade AA Cristian Mazelli is a dedicated Vespa enthusiast and he has been most active on the Italian scooter racing scene for many years. During his time as a racer he was constantly faced with material and part quality problems he deemed as unsuitable for the task in hand. To ease these bottlenecks in supply he decided to use his career-based knowledge of industrial research and development to create parts under his own name that he now markets under the 'CRIMAZ' logo. Beautifully detailed solutions combined with very high production quality are the results! This bearing-equipped pressure plate from CRIMAZ is compatible with all Vespa smallframe clutches with a central spring and all Vespa largeframe types with a completely circular opening to accept the plate. It is fitted with ball-bearings and is held in position on the clutch with the help of an O-ring. The CRIMAZ pressure plate is slightly taller than the original and protrudes 3.2mm over the clutch body, as opposed to the 1.5mm of the original type. It also sits a little deeper within the clutch. During mounting the altered distance to the pressure rod and the clearance within the clutch should be checked and compensated for!