CEAB 93331 IGNITION COIL DYNAMO

Supply CoilFlywheel 1°, lighting coil, for Vespa 150 lighting coil, for Vespa 150VBB1T 71001->/VBB2T/GL, for Vespa 125 VNB4-5T/GT/GTR/Super/150 VBB2T/Sprint/V/Super with battery, withbattery, 3 wires, yellow/blue/green, pin distance: 43mm, 5,2, hightcore 13 mm Unfortunately, the production of complete stator plates has run out for many Vespa models. Therefore, we have put on stock all the individual parts that are still available: Ignition coils, supply coils, points assemblies, condensers, pick-ups etc Over the years and according to country of destination PIAGGIO have varied the supply coils included on their stator plates, irrelevant of model or type. This means they cannot be 100% reliably identified according to the basic model specification. Another reason for these items being wrongly identified is that they may have already been replaced since the Vespa left the factory. For positive identification, when ordering replacements from our shop, please provide us with all possible identification details located on the coil itself to help us be able to dispatch the correct component. We have perfect coils produced on our behalf by the Italian manufacturer CEAB, as part of our SIP Spareparts range. We made sure that along with adequate wiring, accurately sized widths, coil windings that the correct soldering tab were all in the perfect positions. As a result these items fit properly first time, always do their job and save a lot of future hassle once correctly installed. If all this talk of ignition coils is a bit over your head and you still require a replacement or upgrade? Look no further than our SIP range of complete 'Plug & Play' stator plates! Please note: Both coils (#91492000 & #91493000) should always be ordered in combination with each other!###91492 - 93331 (PIAGGIO)