Huile moteur MOTUL 104118

Motul 300V 4T Factory Line Road Racing 10W40 is a high performance synthetic fuel-economy engine oil based on ester core technology and is specifically designed for racing motorcycles with 4T engines, which are designed to run at viscosity 10W40, for use in MotoGP, SuperSport, Superbike, high-speed and hillclimb racing, etc.. Ideally suited for demanding motorcycle and quad engines in racing and street use.

Advantages:

- Max. Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection.

- Low traction coefficient of Ester Core technology reduces friction losses and improves overall performance by up to 1.3%.

- Ester Core technology combined with the additive package improves shear strength, wear protection and engine and transmission life. This is documented with the outstanding FZG (Forschungsstelle für Zahnräder und Getriebebau) test result of >14 FLS (Failure Load Stage). The smaller the value e.g. 1 FLS the lower the wear protection, the higher the value e.g. >14 FLS the better the wear protection of the gearbox. This test can be used to determine whether an adequate lubricant film thickness between the gears ensures reliable gearbox function

- Very high pressure absorption capacity guarantees maximum lubrication reliability even in extreme temperature ranges

- For modern engine technology with wet clutch and gear lubrication in the same oil bath. No clutch sticking and slipping

- Fastest possible oiling already in the starting phase reduces critical cold start wear and guarantees long engine life

Ester Core Technology:

Motul has been developing high-performance engine oils based on synthetic esters for several decades. The special selection of synthetic esters and combination with an innovative additive package form an extraordinary synergy. Ester Core is the latest technological development stage and enables maximum engine power output without compromising reliability and wear.

Specifications/Releases:

Specifications: Exceeds JASO & API requirements.

Approvals: JASO T903 Annex A (JASO MA Friction Value Requirements).